Por gusfersa
Aqui un poco de informacion de todas las firmwares que encontre, esta en ingles:
R44419 - (Asian) Can be installed over non sticky R4513
0FR - Originally made for Chinese market and made popular by Yeut's mps. It's fast, has photo styles, system sounds, and hot messages. Most mods applicable.
1AR - Made for Malaysian users. Has better camera (photo) quality, photo styles, system sounds, screen3 and is fast. Better than normal reception.
07R, 08R, 09R, 17R - I couldn't find much info about these except, that like every other R44419 f/w, they have photo styles. Probably similar to other R44419 f/w. 17r is very new, I only found 1 thread about it.
R4517 - (North American) Can't use R44419 or *R4513*. Flashing non-R4517 results in brick and possible corrupted pds.*Update* Bfielding has found a method to install R4513 on top of a R4517. Theres a guide here. Big ups to him! There is also a user by the name of Shevc00f that has accomplished this by using dual-boot. Dual boot seems like the next big thing in Slvr modding, so ill try to keep this thread updated with it.*
25R - Sticky but can be removed with testpoint or got_moto (got_moto has been known to brick trying to remove 25r in the past) BFielding (aka Bigsmoka) has made some great 25r monsterpacks.
1ER - Very moddable, no unique features. Is slow compared to some some other f/w. BFielding (aka Bigsmoka) has made some great 1er monsterpacks too.
32R - T-mobile. Very sticky but can be removed with newer smart clips. Very little, (if any) 32r monsterpacks out right now. There is a possibility of reflashing one of BFieldings (aka BigSmoka) 25r mps.
37R - Newer cingular f/w. Probably very sticky.
R4513 - (European/ South American/ Any Other) can be installed over R44419. If you accidentally flash a R4517 mp, you will get a brick, but it can be easily fixed by flashing a stock R4513 mp. BOOTLOADER NOTE -*09.02*
* more secure bootloader, but a risky downgrade to 08.d0 is a possibility. You can use non-RSA removed 08.D0 monsterpacks with this bootloader*
DAR, DBR, DCR, DDR, DER - Essentially the same, but DER has the most updated CG1 and is the fastest out of the group. The D_R family is faster than the A_R's. Very common f/w.
ABR - Has ringtones from transflash, slightly faster than ACR and has better signal reception than the D_R family.
ACR - Seems to be the most popular russian f/w, and thats where alot of mods come from. Has ringtones from transflash, is a little slower than ABR, but has the best signal reception of all R4513's.
AER - Sticky firmware than can be removed using got_moto, Blank Neptune method (yeut has a great guide on his blog) or testpoint (not recommended, risky). Most mods possible and some good mps out there.
EOR -Sticky firmware can be removed using the same methods as mentioned above. Is fairly fast and can do most mods.
5ER,5DR - One of the oldest f/w for the L7. laggy and slow but has system sounds. Seem size is not equivalent to newer f/w. No one really uses this one anymore...
I tried to make this as accurate as possible but please correct me if you see a mistake, or if you can add more info. There are probably many more (theres a pattern - a,b,c,d...) but i think they are just minor revisions. F/ws in the same families (A_r, D_r) should be closely related.
Responder:
Originalmente Escrito por javiculi Ver Mensajes
Pana este es la informacion que me pediste Boot Loader 09.02 SW Version: R44419_G_08.D6.1AR_RB Espero que me puedas ayudar
El L7 tiene dos tipos de Boot:
BOOT 08.D0
Modelo de telefono soportado: L7 SLVR(Original), L7i (Realizando un BootLoader Downgrade se la puede instalar, que de paso te libera el celular, no usa TestPoint)
Firmware Soportados: R44419, R4513
BOOT 09.02 o 09.xx
Modelo de telefono soportado: L7i
Firmware Soportados: R4517, R44419 (Nunca lo he visto pero ahora se que si hay)
Ya busco el tuto para el Downgrade de 09.xx a 08.D0!!!
Responder:
Originalmente Escrito por gnrmop Ver Mensajes
hola alguien sabe como activar las luces del teclado? xq flashee mi cel y no me andan ahora, ah y otra cosa xq cuando me mandan un msj me figura un numero ej: 03434123456,
y cuando me llaman me figura asi 343-412-3456. es el mismo numero pero me lo toma de 2 formas diferentes y yo tengo q tener el contacto 2 veces almacenado para reconocerlo siempre.
bueno espero q me respondan porq es una buena info para todos...
intenta con los siguiente:
primero configura el idioma en ingles, para poder saber cual opcion del "Initial Setup" es la que hay que cambiar:
menu->configuacion-> configuracion inicial->lenguaje
luego sigue esta otra ruta:
menu->settings->initial setup->Keypad backlight (si esta en ingles), pones en On...
Espero esta sea la solucion!!!!
LIBERAR CON BOOT 08.D0 / 08.A0
SIN TESTPOINT!!!!
PROBADO SIN PROBLEMAS EN L7 Y V360 - R4513! Funciona de maravilla...
REQUSITOS:
* Boot loader 08.D0 / 08.A0
* P2k Easy tools 3.9
* UNLOCK Flash L7 v360
1) Abre el P2k Easy tools 3.9 y conecta el telefono
2) En la ficha FLASH, checa Flash SHX y abre el UNLOCK Flash L7 v360.shx
3) En Phone Model asegurate que este SLVR L7 o V360
4) El programa comenzara a trabajar (es muy probable que deje de responder, en ese caso cierra el p2k tools nada mas). La pantalla de tu SLVR se pondra blanca. En breves instantes tu celular se apagara, no prendera ni en modo boot ni nada. NO TE PREOCUPES... VAS POR BUEN CAMINO
5) Ahora desconectalo, saca la bateria y espera unos instantes.
6) Vuelve a conectarlo asi como esta. Quizas la pc no te lo reconosca o te muestre DISPOSITIVO DAÑADO O DESCONOCIDO
7) Abre nuevamente el p2k tools y en la ficha REPAIR, checa FULL REPAIR PDS ZONE, recuerda seleccionar tambien el modelo correcto del celular y da DO SELECTED JOBS. El programa reconocera tu equipo como si le hiberas hecho testpoint y aparecera tambien un boot diferente al 08.D0, a mi me mostro algo como 0300)
8) Te saldra un aviso para desconectar el testpoint (aunque no lo hayas hecho), solo dale aceptar
9) Flashea un MP (encuentras varios en la seccion de descargas). RECOMENDADO: ANDAPE V2.0 para L7
LISTO! TIENES TU CELU LIBERADO PARA CUALQUIER COMPAÑIA!
DOWNGRADE BOOT 09.02 A 08.D0
Necesitan:
1º Fuente de L7e
2º P2k Easy tools 3.9
3º ramldr2_0.31
4º Boot's
5º Flash&backup 3.0.4
DESCARGA LOS ARCHIVOS DESDE AQUI
1. Flashea tu telefono con la L7e font (fuente) con el FB3 y espera al cartelito de "Cerrar".
2. Desconecta el cable y saca la batería.
3. Abre el P2K_Easy_Tool_v39, selecciona el modelo de tu teléfono y anda a "Repair" y despues "Full repair PDS zone".
4. Ahora conecta el cable sin la bateria y apreta "Do selected job" despues "OK".
5. Desconecta el telefono, pon la bateria, al encenderlo en modo flash tendria que aparecer: 08.A0 o 08.d0(en L7) si es asi ya bajaste el bootloader y solo te queda flashear el cel con una MP compatible con tu nuevo boot.
* Si no es asi, con el ramldr2_0.31, apretá "Send loader", despues "Write BOOT" y elegí el bootloader que queres en tu teléfono.
Por ejemplo: Para L7 - 08. D0 & V360 - 08.A0
6. Cierra el programa.
7. Abreel Flash & Backup y flashea el teléfono con cualquier MP compatible con el bootloader 08.D0(para L7) / 08.A0 (para V360). Te recomiendo la de ANDAPE, esta rebuena y con multifont
YA TIENEN BOOT 08.D0 Y POSIBLEMENTE LIBERADO!
PD: si los links no sirven, o necesitan algun programa que no encuentren, me envia un MP y con gusto se los pasogusfersa