hola compre esta board para un procesador e6300 core 2 duo y no puedo hacer overclock por que no me inicia el pc cuando le ago cambios porfa si alguien la tiene expliqueme , viendo en un foro vi que devia subir el voltaje del MCH pero no se donde.
Este es un ejemplo:
Here's my setup:
Intel E6300 Core 2 Duo=Conroe
Asus P5N32 SLI SE Deluxe mobo
1Gb G.Skill PC2 6400
2X7800GTOC SLI
2xSeagate SATA 3.0Gb/s
Air
This thing runs out stock settings in BIOS like this
FSB-1066Mhz but goes up to 1600
RAM-800Mhz but goes to 1000
vcore-1.3
vdimm-1.9
Chipset@800Mhz on NB and SB but has settings from 200-1000
I can set it with the Asus AI Overclocking to 20% and it boots fine at 2.2Ghz. I can set the FSB to 1400 and RAM to 1000 while bumping the vcore to 1.35 and the vdimm to 2.0 and leaving the chipsets at 800, it will Post at 2.4 but not boot into Windows. Running the Beta BIOS 0501, maybe I need to go back to 0401?
Este es un ejemplo:
Here's my setup:
Intel E6300 Core 2 Duo=Conroe
Asus P5N32 SLI SE Deluxe mobo
1Gb G.Skill PC2 6400
2X7800GTOC SLI
2xSeagate SATA 3.0Gb/s
Air
This thing runs out stock settings in BIOS like this
FSB-1066Mhz but goes up to 1600
RAM-800Mhz but goes to 1000
vcore-1.3
vdimm-1.9
Chipset@800Mhz on NB and SB but has settings from 200-1000
I can set it with the Asus AI Overclocking to 20% and it boots fine at 2.2Ghz. I can set the FSB to 1400 and RAM to 1000 while bumping the vcore to 1.35 and the vdimm to 2.0 and leaving the chipsets at 800, it will Post at 2.4 but not boot into Windows. Running the Beta BIOS 0501, maybe I need to go back to 0401?
