es que pa quemarlo es diferente de como quemamos los juego....
aqui les dejo las instrucciones pero en english, por que me da pereza traducirlo...
Step #1
Users with firmware 1.6 begin by downloading activate.iso from this link.
(el link lo quito por que creo que no se puede poner eso aqui, en google se consigue facil)
Step #2
Once you have the activate.iso downloaded
Insert a blank DVD+R DL
Note: You must use a dual layer! CD +/- R or DVD +/- R will not work.
Step #3
Open up IMGburn and set the layerbreak setting to Optimal by going to
Tools --> Settings... --> Write -->
Select Calculate Optimal on the top left corner.
Note: Once you burn the Activate.iso you can go back to any other settings.
Step #4
Burn at 2.4x / 4x / 8x
I recommend 2.4x since it's a small file you want to make sure you have everything written on there.
Step #5
IMGburn will bring now bring to your attention that activate.iso is small enough to fit a DVD5 or (DVD +/-/R)
Ignore it and continue burning on a dual layer. Click Yes
Step #6
IMGburn will now ask if you would like to write the image on one layer. Since it's small enough to fit on one layer.
Click Yes
Step #7
Once the disc is made pop the disc into your xbox360. Let it read, after a while it will say Play DVD.
Press A on your controller and you should get a message saying to play this game please insert in an
xbox360 console. You can now eject it.
Step #8
The next game you insert in your 360 will boot regardless of stealth or Wave structure. Effectively disabling the security measure on 1.6
Warning: This disc is a one-shot boot iso meaning it will only work for the next game you insert. After you eject your wave 4 game,
1.6 stealth will be re-activated. Meaning you will need to insert your activate.iso disc again to play another wave 4 game.