Cheriee dijo:
Hola, sera que me podeas ayudar en algo, ando buscando un programa que me permita cambiarle las letras e inconos de mi cel motorola
huy este man si anda perdido, metase a los foros de celulares
http://www.laneros.com/forumdisplay.php?f=44
por otro lado mirando en los foros de corsair dicen que las ponga en 2.2v
y recomiendan esta configuracion del bios, no es la misma board pero segun lei a la mia tambien le sirve:
Testing parameters for Twinx/XMS2-8500/C5:
Twin2x1024-8500 Data Sheet
Twin2x2048-8500C5 Data Sheet
Motherboard make and model: Asus M2N32-SLI Premium/Deluxe
Each pair is tested and packaged together using the following settings:
AI Over Clock Tuner: Manual
OC Operation: Disabled
NOS Operation: Disabled
CPU External Frequency: Manually set to 268 MHz
PCI CLK1: Auto
PCI CLK2: Auto
DDR2 Voltage control: 2.200V
CPU Core Voltage: Auto
CPU Multiplier: 10
DDR2 SDRAM Clock: Manually set to 800MHz
DRAM Timing Selectable: Manual
SDRAM CAS Latency: 5T
SDRAM RAS to CAS Delay (tRCD): 5T
SDRAM Row Precharge (tRP): 5T
SDRAM Active to Precharge Delay (tRAS): 15T
SDRAM Write Recovery Time: 5
1T/2T: 2T
A1 Clock Skew: Auto
Advanced voltage control
CPU Vcore offset:_Disabled
DDR2 Termination: 0.5x
CPU to NB HT:____1.200V
NB to SB HT:_____AUTO
NB Core/PCI-E:___AUTO
SB Core/PCI-E:___AUTO
SB Standby core:_+1.500V
Output driver control
CKE:______AUTO
CS/ODT:__1.00X
ADD/CMD:_1.00X
MEMCLK:__1.00X
All other settings are motherboard defaults.
Maximum DDR2 recommended VDIMM: 2.1 Volts, However this DDR2 module would be the only one rated at 2.2 Volts Max.
voy a ensayar primero solo subiendo el voltaje a 2.2 luego ensayo lo otro
gracias por al colaboracion.